Drain Repair in Charlotte NC - Pathmaker Plumbing - 704-733-7507

Complete drain repair services in Charlotte, NC by Pathmaker Plumbing. Sagging in the drain pipe caused water to settle and prevented a natural flow. Learn more about drain repair and plumbing services at Pathmaker Plumbing or call 704-733-7507.

At Pathmaker Plumbing we provide complete residential plumbing services including repair of sinks, faucets, showers, toilets, water heater repair, drain repair, leak detection and more. Serving Charlotte, Harrisburg, Concord, Huntersville, Matthews, Ballantyne, Pineville, Waxhaw, Indian Trail, Mint Hill, Weddington, NC and more.

Residential Water Heaters – Making The Right Choices

Are you installing new water heaters or replacing the faulty water heaters in your home? Today there are multiple options for the homeowners when it comes to residential water heaters. Before you select your water heaters, you need to know your options, their advantages and disadvantages. Three main factors have to be taken into account when it comes to the selection of the right type of water heater for your home.

1. Initial cost of the water heater
2. Recurring costs / Energy or electricity bills
3. Maintenance

You will have to assess each type of water heater carefully and select the most cost effective water heater. When you are making your decision, it is important that you do not decide just based on the initial cost. Two most common and popular types of water heaters include tankless water heater and hybrid heat pump water heaters.

What are the factors that one needs to take into account while deciding between tankless water heater and hybrid heat pump water heaters? The key factor to be taken into account here is your water consumption. Discuss your requirements with your local plumbing company and get their suggestions on selecting the most energy efficient option. When compared to the regular storage type water heaters, tankless water heaters can save you up to 30% on your energy bills. Hybrid heat pump water heaters can save as high as 60% of your energy bills.

Looking at the initial costs, storage type water heaters are less expensive when compared to tankless water heaters. Hybrid heat pump water heaters are pricier when compared to tankless water heaters. However, going for energy efficient options will pay up for the water heaters over the years through the cumulative energy savings that you enjoy month after month. However, you should not lose sight of another important factor that is the maximum life expectancy of each type of water heater. For example, tankless water heaters are said to last for ten to fifteen years. The question is will the energy savings compensate for the additional expenses that you are likely to incur while buying your tankless water heater. This is where your regular water consumption rate will play an important role. It is always best to get professional help while deciding what type of water heaters to choose for your home. Your plumbing company will also be able to give their input on the general maintenance challenges that very likely with each type of water heater.

You will find different types of even within the tankless options such as gas-fired and electrical water heaters. When you set out to explore different models of water heaters you are likely to be confused. The bottom line however is that you should choose the most energy efficient water heater with low maintenance hassles.

Try to obtain quotes for different types of water heaters for your residential requirements. When you are comparing the quotes make sure that the quote also includes the installation charges for each type of water heater.

Learn more about water heater repair and replacement in Charlotte, NC at Pathmaker Plumbing.

Commonly Used Plumbing Products

Applying thread paste (pipe dope)

There are many different products available for use in the plumbing trade.  These products can range from harmful, to questionable to necessary.  There is also a lot of confusion about which product to use, when to use it, and where to use it.

Below is a list of the most common products, with a short explanation of each one.

---

1. Thread paste.  Also called "pipe dope", thread paste is probably the most used product on a plumber's truck.  The main function of pipe dope is to seal threaded connections by filling in the tiny voids.  Applying the paste will also act as a lubricant and help to tighten the connection a little better.  There are many different kinds of thread paste on the market, and some contain different chemicals.  You should always be sure that the paste you are using is ok for the material you are using it on.  Some pastes should not be used on plastic threads.  There are a few other situations that plumbers like to apply the paste, such as on the mating surfaces of certain kinds of unions, inside compression fittings, inside flared connections, or on the bottom of certain types of gaskets.

2. PTFE Tape.  PTFE (polytetraflouroethylene) tape, or thread tape, is commonly (and mistakenly) called Teflon tape.  Since Teflon is a trademarked brand of the DuPont corporation, this product should not be called "Teflon tape."  On threaded connections, PTFE tape can be used in place of, or along with pipe dope.  I don't really have a preference either way.  If it is a connection that I most definitely do not want to have to fix, I will usually use both.  There are also certain devices that will call for tape specifically because it can be harmful if paste is introduced into them when the water is turned on.  It is important to not "overwrap" the threads with the tape, as this could possibly result in putting too much stress on the female fitting and crack it.

3. Plumber's putty.  This is probably the most widely misused plumbing item there is.  There are many times that I come across putty being used in place of paste or tape, and that is always a sure fire leak.  Putty should only be used on the underside of something that will be tightened or compressed down, such as the underside of sink drains, shower drains, and bathtub drains.  Some plumbers will use it underneath stainless steel sinks to seal them to the countertop as well. In the old days, it was used to seal toilets to the toilet flange at times.

4. Latex caulk and silicone caulk.  Caulks and silicones should never be used to seal any piping.  They should only be used to seal fixtures down, or seal around areas that should not allow water in.  Examples includes, caulking down sinks, tub spouts, outside penetrations, maybe even faucets.  Some plumbers like to use silicone on the underside of sink, shower and bathtub drains in lieu of plumber's putty.  I do not recommend this for two reasons: 1. It is very messy, and 2. If you ever have to remove it, good luck.

5. Plumbers grease.  Any time you take a faucet apart, grease up everything!  This includes O-rings, threads and any moving parts.

6. Flux.  Flux is what you put on copper or brass pipe to prepare it to be soldered.  It cleans the pipe and allows the solder to "flow" into the fitting.

7. Draino.  Don't use it, ever.

Learn more about plumbing services at Pathmaker Plumbing.

Why Don’t Water Heaters Last as Long as They Used to?

A cursory search of Google will tell you that the average lifespan of a water heater is 8-11 years. While one shouldn't believe everything that’s stated on the internet there is some truth to this statement. But only some.

When I first started my plumbing career in the 90’s I remember removing water heaters that were installed in the 1950 and 60's. Some of those were still heating water the day I removed them. I don’t see water heaters that are still working 30 or 40 years later anymore. Very rarely will I find one that is still kicking after 20 years. But that doesn't have to be the case.

Much to the chagrin of conventional wisdom water heater manufacturers haven't cheapened the quality of the units produced these days.They really do still “make ‘em like they used to”.

With the constant threat of lawsuits these days they may even be making them better. But the problem doesn't lie in how modern water heaters are made. The problem lies with how they are installed and maintained, or more appropriately, how they aren't installed and maintained.

There are five layers of protection water heaters have against failure and leakage. The first  two are provided from the manufacturer.

First, is the anode rod. The anode rod is a  long piece of metal which runs almost the full length of the water heater and its job is to disintegrate from the reactive materials and electric current in the water BEFORE your tank does. In most areas and for many water conditions they last about five years before they are completely depleted. If you read the manual that comes with your water heater you will see the manufacturer recommend that the anode be inspected at least annually for deterioration.

Second is the glass lining. Just imagine the inside of your water heater tank being glazed like a piece of pottery. This is a similar process for  protecting the steel of your tank. Once the anode rod deteriorates, this glass lining is the only thing preventing the tank from rusting out. On its  own, this lining doesn't last very long.

The other layers of protection are provided by the installer of the water heater and mandated by most plumbing codes. The primary one is from proper piping connection. Dielectric unions provide a buffer zone between the steel of the water heater tank and the copper piping which connects the tank to the rest of the plumbing system. When steel and copper are connected and water run through them they begin to share electrons at a rapid rate. We refer to this sharing of electronic bonds as corrosion. Dielectric unions/connections are often overlooked or ignored by installers to the detriment of the water heaters longevity.

The fourth layer of protection is also provided by your water heater installer. In many scenarios a water heater is required to have a thermal expansion tank. If  you have a pressure reducing valve, or a back check valve at your meter (most municipalities do) you are required by code to have a thermal expansion tank. This device gives a safe place for the extra volume created by heating water to go. Without this device, every time the water heater turns on to reheat the stored water, it will produce excess pressure/volume which is a stress on the water heater, water piping, and fixtures attached to it (toilets, washing machine hoses, ice maker,  etc.).

The fifth layer of protection is provided by you, the operator of the heater. Again, referring to that handy manual which the manufacturer provided you will find all water heaters should be flushed out and drained to remove build up and sediment at least annually. Some manufacturers recommend this every six months! This not only keeps the water heater at full heating capacity, it also prevents minerals and deposits from attaching to the inside of the tank and solidifying causing future damage.

Unfortunately most of the water heaters I see these days are improperly installed. BIg box stores and do it yourselfers just don't have the know how of a licensed professional. As a result a water heater that should be running for 15 to 20 years is dead and gone in only ten. Just because its heating water and not leaking does NOT ensure a plumbing fixture is installed correctly, especially a water heater. The manufacturer recommendations and the municipal codes are there to not only keep people safe but also to ensure they get the full benefit of a properly installed unit.

Learn more about water heaters and water heater replacement at Pathmaker Plumbing.